webercolor classic
Packaging: 1 kg/pack
Colors: Multicolor collection (Refer to next page)
Tile grout for COMMON areas and tiles
Feature:
- Universally used for common areas and ordinary tiles
- Our Multicolor collection transforms joints into vivid & artistic lines when combined with different tile types and colors
- A combination of many preeminent features:
- Resistance to general cleaning agents for a durable and beautiful look that
withstands the test of time.
- Creating no scratches to tile surfaces when mopped and cleaned
- No cracks guaranteed for 1- 6 mm wide joints - In compliance with LOW VOCs standard - safe for user’s health
Application:
- Application:Grouting joints for ceramic, porcelain, terracotta, terrazzo, glaze mosaic, marble, and other natural stone tiles. For dry areas of interior floors and walls
Support
Cho khu vực ẩm ướt bên trong nhà như phòng tắm, nhà bếp
Colors
- Average consumption rate(*): 1.5kg/m2
- Specific weight: ~0.9 - 1.1/g cm3
- Time for the chemical ingredients to take full effect: 3 - 4 minutes
- Time for mixing and use: 30 minutes
- Setting time for grouting after installation of tiles: 24 hours
- Joint width: 1 - 6 mm
- Floor setting time before allowing traffic: 24 hours
*Rates are for reference only. Actual consumption rates may vary depending on the construction method, joint width, and tile thickness.
Shelf life and storage: Within 1 year from date of manufacture in unopened packaging and stored in a dry, well-ventilated area. If the package has been opened, it must be properly fastened and stored at a dry, well-ventilated place, and should be inspected prior to use.
| Standard | webercolor classic | Test method |
|---|---|---|---|
| Abrasion resistance | ≤ 2,000 mm3 | Pass | ISO13007 part 4-4.4 and EN12808-2 |
| Flexural strength | ≥ 2.5 (N/mm2) | Pass | ISO13007 part 4-4.4.1.3 and EN12808-3 |
| Compressive strength | ≥ 15 (N/mm2) | Pass | ISO13007 part 4-4.4.1.3 and EN12808-3 |
| Shrinkage | ≤ 3.0 (N/mm2) | Pass | ISO13007 part 4-4.3 and EN12808-4 |
| Water absorption after 30 minutes | ≤ 5.0 g | Pass | ISO13007 part 4-4.2 and EN12808-5 |
- Use the tile grout mixture entirely within 30 minutes after mixing and avoid putting it under direct sunlight.
- Avoid using tile grout on too hot substrates. While working under direct sunlight, use sunlight-proof shields to cool down the ambient temperature.
Tutorials and videos
Case studies
