weberdry top New Product
Packaging: 5 kg/Set & 15 kg/Set
Color:
- Part A (powder): Grey
- Part B (liquid): Milky White
2-component flexible waterproofing product weberdry top
Feature:
- Flexible, resist to micro cracking.
- To waterproof before tiling or without tiling.
- Flexible and hairline cracking bridging property.
- Resist to hard water and chlorinated water.
- Ideal for human-used water tanks.
- Good adhesion.
- Easy to applied by roller.
- Low VOCs / Non-toxic
Application:
- Suitable for balconies
- For bathrooms, kitchens, corridors, swimming pools, wet areas
- For areas subject to vibration like all items in the body of building or high vibration surfaces such as gypsum, fiber cement boards, special surfaces such as lightweight brick walls
- Ideal for human-used water tanks
weberdry top is a 2-component cement-based waterproofing product, suitable for waterproofing areas with long-term contact with water and strong vibrations such as domestic water tanks, fire protection water tanks, balconies...
Shelf life and storage:
9 months from the date of manufacture in sealed containers.
If the packaging has been opened, it must be stored in a closed container and kept in a dry, well-ventilated area and need to check before use
Indicator | weberdry top | |
|---|---|---|
Composition Part A: Grey powder Part B: Milky white liquid | 15kg set 3,33 kg/bag x 3 1,67 kg/bag x 3 | 5kg set 3.33 kg / bag 1.67 kg / bag |
| Average consumption rate* | Wet area:~2.5kg/m²/2 coats Water tank:~3.5kg/m²/2 coats (depend on substrate conditions) | |
| Crack bridging ability | BS EN 14891:2017 | ≥ 0.75Mm (standard condition) |
| Pot life | ~30 minutes at 30°C | |
| Dry time for 1st coat | ~3 hours at 30°C | |
| Dry time for 2nd coat | ~3 hours at 30°C | |
| Adhesive strength (concrete) | ASTM 7234-21 | ≥ 1 N/mm² |
| Waterproofing with 1.5mm membrane thickness | BS EN 14891:2017 | Impermeable at 3 bar pressure over 7 days |
| Adhesive strength after heat aging | BS EN 14891:2017 | ≥ 0.5 N/mm² |
| Adhesive strength after contact with water | BS EN 14891:2017 | ≥ 0.5 N/mm² |
| Adhesive strength after contact with lime water | BS EN 14891:2017 | ≥ 0.5 N/mm² |
*Note: These results are for reference. Actual consumption depends on the type of surface, surface flatness and the desired thickness of the waterproofing layer.
- Avoid applying under intense sunlight and strong winds.
- In areas with rapid infiltration rate, 3 waterproofing layers should be applied
- Do not travel on the waterproofing layer, even if the waterproofing layer has dried out, as it may affect the effectiveness of the waterproofing.
Tutorials and videos
Case studies
