webertai fix

Technical datasheet:

• Coverage: ~5 kg/m²

• Density of powder: ~ 1.4 g/cm³

• Chemical curing time: 3 - 4 minutes

• Pot life (in shade): 4 hours

• Opening time: 20 - 30 minutes

• Adjusting time: 15 minutes

• Recommended thickness: 2 - 10 mm

• Waiting time before grouting: 24 hours

Remark: These test results are from laboratory test. They could be slightly different from on-site results because of the differences in applications and conditions.

SHELF LIFE AND STORAGE: One year after manufacturing date when stored unopened in dry and ventilated place. Store airtight in dry and ventilated conditions if remained in opened bag

• Not suitable for outdoor walls when paving at a height of more than 6 meters (instead use the webertai flex).
• It is not appropriate to use brick on the surface of the old brick, painted surface (instead of using webertai gres, webertai 2-in-1)
• Not suitable for use on glass substrates, wood substrates (instead use weberprim 2 and webertai flex).
• Not suitable for use on gypsum board, gypsum board, timber (instead use webertai gres, webertai flex or weberfix plus)
• Not suitable for metal and plastic surfaces (instead of using weberepox easy)

Feature:
• Good adhesion, double bonding strength (compared with webertai vis)

• With special additive providing anti-slip property

• Laying tile on WALL for absorbent tiles and even low-absorbent tiles such as granite, porcelain, marble up to 60x60 cm in size

• Low - VOCs standard

Application:

• Suitable for ceramic, tile / granite, porcelain, water absorbent and low absorbent marble of group BIb and above and up to 60x60 cm in size for interior areas such as living room, bedroom, office, ...
• Suitable for cement wall and floor surfaces
• For exterior areas under canopy and heights up to 8m against walls *

(*) Contact us for further advice.