webertec grout 60+

Packaging: 25 kg/bag
Color: Concrete Grey
Cementitious shrinkage compensate grout with compressive strength >60 Mpa
Feature:
- Compressive strength >60 Mpa
- Highly stable.
- Excellent flow.
- Easy to adjust fluidity without stratified and bleeding
- Non-toxic, non-corrosive
- Can be Pumped with suitable grout pump.
Application:
Webertec grout 60+ is shrinkage compensated, pre-mixed cementitious grouting mortar, self-leveling including silicafume to improve the technical properties and strength of mortar.
Webertec grout 60+ is suitable for the flowing grouting works:
- Machine foundations.
- Rails beds
- Anchor bolts.
- Columns in precast construction.
- Bridge bearings.
- Cavities, gaps, recesses
- High strength repair
Test | Standard | Webertec grout 60+ |
---|---|---|
Density |
| ~ 1,5 g/cm3 |
Density of fresh mortar |
| ~2,0 g/cm3 |
Compressive strength | ASTM C109 |
≥ 20 Mpa |
Flexural strength | ASTM C348 |
≥ 5 Mpa |
Bleeding | ASTM C940 | 0% |
Expansion | ASTM C940 | 0% |
Flow ability | TCVN 9204 | 160 - 250mm |
Application temperature |
| 5 – 35°C |
Initial setting time | ASTM C403 | ≥5 h |
Final setting time | ASTM C403 | ≥7 h |
Particle size |
| < 4,76 mm |
Min. gap |
| 7mm |
Max. gap |
| Please contact Weber |
*Note: All i-technical data stated in this product datasheet area based on laboratory test. Actual measured data may vary due to different conditions.
Shelf life: 6 months from production date in case of stored properly in unopened original packaging.
Storage conditions: Dry, cool, shade areas.
- Compressive strength >60 Mpa
- Highly stable.
- Excellent flow.
- Easy to adjust fluidity without stratified and bleeding
- Non-toxic, non-corrosive
- Can be Pumped with suitable grout pump.
- Minimum application temperature is 5 °C. At temperature lower than 20 °C setting time and strength gain will be slower.
- Normal curing practice should be observed for at least 3 days wherever mortar is exposed.