webertec grout 40+

Packaging: 25 kg/bag
Color: Concrete Grey
Cementitious shrinkage compensate grout with compressive strength >40 Mpa
Feature:
- Compressive strength >40 Mpa
- Highly stable
- Excellent flow
- Easy to adjust fluidity without stratified or bleeding.
- Non-toxic, non-corrosive.
- Can be pumped with suitable grout pump.
Application:
Webertec grout 40+ is shrinkage compensated, pre-mixed cementitious grouting mortars, selflevelling including silica fume to improve the technical properties and strength of mortar.
Webertec grout 40+ is suitable for the flowing grouting works:
- Machine foundations.
- Rails beds
- Anchor bolts.
- Columns in precast construction.
- Bridge bearings.
- Cavities, gaps, recesses
- High strength repair
Test | Standard | webertec grout 40+ |
---|---|---|
Density |
| ~ 1,5 g/cm3 |
Density of fresh mortar | EN 14891 | ~2,0 g/cm3 |
Compressive strength | ASTM C109 |
≥ 10 Mpa |
Flexural strength | ASTM C348 |
≥ 3 Mpa |
Bleeding | ASTM C940 | 0% |
Expansion | ASTM C940 | 0% |
Flow ability | TCVN 9204 | 170 - 240mm |
Application temperature |
| 5 – 35°C |
Initial setting time | ASTM C403 | ≥6 h |
Final setting time | ASTM C403 | ≥8 h |
Particle size |
| < 4,76 mm |
Min. gap |
| 7mm |
Max. gap |
| Please contact Weber |
*Note: All i-technical data stated in this product datasheet area based on laboratory test. Actual measured data may vary due to different conditions.
Shelf life: 6 months from production date in case of stored properly in unopened original packaging.
Storage conditions: Dry, cool, shade areas.
- Highly stable
- Excellent flow
- Non-toxic, non-corrosive.
- Can be pumped with suitable grout pump.
- Minimum application temperature is 5 °C. At temperature lower than 20 °C setting time and strength gain will be slower.
- Normal curing practice should be observed for at least 3 days wherever mortar is exposed.