webercolor power
Packaging: 1 kg/pack
Colors: Multicolor collection
3 PROTECTION tile grout: Resistant to mildew, black moss, and bacteria
Feature:
- Resistant to mildew, black moss, and bacteria with biocide mildew-resistance content ideal for use in wet-prone areas such as kitchen, bathroom,...
- Our Multicolor collection transforms joints into vivid & artistic lines when combined with different tile types and colors.
- A combination of many preeminent features:
- Resistance to general cleaning agents for a durable and beautiful look that
withstands the test of time.
- Creating no scratches to tile surfaces when mopped and cleaned
- No cracks guaranteed for 1- 6 mm wide joints - In compliance with LOW VOCs standard - safe for user’s health
Application:
- Grouting joints for ceramic, porcelain, terracotta, glaze mosaic, marble, and other natural stone tiles.
- For interior areas, especially wet areas such as bathrooms, kitchens
Colors
- Average consumption rate(*): ~1 kg/5 m2
- Specific weight: ~0.9 - 1.1/g cm3
- Time for the chemical ingredients to take full effect: 3 - 4 minutes
- Time for mixing and use: 30 minutes
- Setting time for grouting after installation of tiles: 24 hours
- Joint width: 1 - 6 mm
- Floor setting time before allowing traffic: 24 hours
*Rates are for reference only. Actual consumption rates may vary depending on the construction method, joint width, and tile thickness.
Shelf life and storage: Within 1 (one) year from the manufacturing date if kept in the original packaging and stored at a dry, well-ventilated place. Opened packages must be properly fastened and stored at a dry, well-ventilated place, and would require checking before use.
| Standard | webercolor | Test method |
|---|---|---|---|
| Abrasion resistance | ≤ 2,000 mm3 | Pass | IISO13007 part 4-4.4 and EN 12808-2 |
| Flexural strength | ≥ 2.5 (N/mm2) | Pass | ISO13007 part 4-4.1.3 and EN 12808-3 |
| Compressive strength | ≥ 15 (N/mm2) | Pass | ISO13007 part 4-4.1.4 and EN 12808-3 |
| Shrinkage | ≤ 3.0 (N/mm2) | Pass | ISO13007 part 4-4.3 and EN 12808-4 |
| Water absorption after 30 minutes | ≤ 5.0 g | Pass | ISO13007 part 4-4.2 and EN 12808-5 |
| Water absorption after 240 minutes | ≤ 10.0 g | Pass | ISO13007 part 4-4.2 and EN 12808-5 |
- Use the tile grout mixture entirely within 30 minutes after mixing and avoid putting it under direct sunlight.
- Avoid using tile grout on too hot substrates. While working under direct sunlight, use sunlight-proof shields to cool down the ambient temperature.
Tutorials and videos
Case studies
